Rosemount 848T Dokumentacja Pobierz pdf (Strona 5)

Quick Start Guide

December 2014

Step 1: Physical installation

Initial configuration

If the device was ordered with a factory configured Network ID and Join Key, it

should join the network with no user input. If unsure, the Network ID and the Join

Key may be manually entered to match the Gateway’s.

The Network ID and Join Key may be obtained from the Gateway on the

Setup>Network>Settings page on the web server (see Figure below).

The Network ID and Join Key may be changed in the wireless device by using the

following Fast Key sequence.

Sensor configuration

Sensor inputs can be configured for different sensor types. To verify or change the

sensor configuration with a Field Communicator, use the following Fast Key

sequence.

Remote mount

The Rosemount 848T Wireless is designed to be installed only in the Remote

Mount configuration where the sensor is mounted separate from the 848T

housing, then connected to the 848T via conduit.

1. Install the sensor according to standard installation practices. Be sure to use

thread sealant on all connections.

Function Key sequence Menu items

Wireless 2,1,1 Join Device to Network

Function Key sequence Menu items

Sensor Configuration 2,1,3 Configure Sensors

1 2 3 4 5 6 7 8 9 10 ... 17 18

Brak uwag

Rosemount 848T Dokumentacja Strona 5